IMPORTANT: This is NOT a beginner plane! If you are not already an intermediate to advanced flyer, do NOT get this plane, you will not be happy. Picture the MiG-29 as a super stunt plane, not something you want to start out on. If you are new to RC, get a flight simulator and learn how to fly before you attempt to fly anything. | |||||||||||||
BEFORE YOU START: Please watch the instructional video, view all the pictures, before you start. This way you have an overview of what's going on and will be able to "fill in the banks" yourself as you go along. After you have read all the instructions, seen the instruction videos, and studied the pictures, if you still have questions please email me and I will help you out. | |||||||||||||
1) Glue Wing Halves Together | |||||||||||||
I use 5 min epoxy on the entire build. | |||||||||||||
2) Install Carbon Rod | |||||||||||||
-
Scroll the foam with a razor blade where you want the rod to be. Do not
cut all the way through. - Use a small standard screwdriver to pluck out the foam. - Epoxy in the tube. |
|||||||||||||
3) Sand all Leading Edges | |||||||||||||
4) "45" all Control Surfaces | |||||||||||||
Use a straight edge and razor blade to “45” all the edges. | |||||||||||||
5) Slide and Glue Fuse/Tails on | |||||||||||||
Do a dry fit first to make sure everything lines up well. | |||||||||||||
6) Slide and Glue Fuse/Nose on | |||||||||||||
Do a dry fit first to make sure everything lines up well. | |||||||||||||
7) Glue Down Servo Tray | |||||||||||||
Do a dry fit first to make sure everything lines up well. | |||||||||||||
8) Glue Down Carbon Nose Support | |||||||||||||
This is to reinforce the front end. | |||||||||||||
9) Tape Control Surfaces on | |||||||||||||
Use some good tape so they do not come up. | |||||||||||||
10) Install Control Horns | |||||||||||||
For
Center of Gravity and updates see page: http://www.rcgroups.com/forums/showthread.php?t=684510&page=12 |
|||||||||||||